Veratron LinkUp Resistive Sensor to NMEA 2000 Gateway
SKU VER-B00042201
Compact NMEA 2000 gateway that converts a supported resistive level, temperature, pressure, trim or rudder sender into network data.
- Input
- Resistive sensor, configurable range/curve
- Typical uses
- Fuel/water level, temp, pressure, trim, rudder
- Connectivity
- NMEA 2000, AirWave/NFC
- Supply
- From NMEA 2000 network
- Protection
- IPX9/K
- Gateway size
- Approx. 4.92 x 1.26 in (125 x 32 mm)
- Configuration
- LinkUp Configurator app
- Series
- LinkUp
Stocked items typically ship the next business day from our US warehouse. 30-day returns on unused stocked items. Exclusions apply. Return policy · Shipping policy
Shopping as a guest. Sign in to save your cart and check out as a dealer.
About this product
Veratron LinkUp Resistive Sensor to NMEA 2000 Gateway is a single-sensor converter for bringing conventional resistive senders into an NMEA 2000 system. It is intended for refits where keeping a proven analog sender is preferable to replacing the entire sensing system.
Key features
- Supports resistive senders for fluid level, temperature, pressure, trim and rudder applications
- Configurable sensor curves including custom characteristics
- NMEA 2000 output for compatible displays
- Contactless smartphone configuration
- Sensor instance and alarm threshold setup in app
- Powered directly from NMEA 2000 backbone
- Sealed, ISO 8846 engine-compartment-compatible construction
Integration and functionality
The gateway applies the selected sensor calibration and publishes the resulting value on NMEA 2000. Supported pre-defined curves simplify common Veratron/VDO sender applications, while custom curves extend compatibility to many existing senders.
Installation
The LinkUp has an NMEA 2000 pigtail and a sensor-side lead. Place it near the sender where practical, keep the connection sealed and configure the sensor type, instance and alarms before commissioning.
Electrical and environmental
No separate power feed is normally required because the gateway is powered from the NMEA 2000 backbone. The resin-filled housing is suitable for engine-compartment installation.
Product details
- Input
- Resistive sensor, configurable range/curve
- Typical uses
- Fuel/water level, temp, pressure, trim, rudder
- Connectivity
- NMEA 2000, AirWave/NFC
- Supply
- From NMEA 2000 network
- Protection
- IPX9/K
- Gateway size
- Approx. 4.92 x 1.26 in (125 x 32 mm)
- Configuration
- LinkUp Configurator app
- Series
- LinkUp
- Function
- Multifunctional
- Ip Class
- IPX9/K
- Connector
- Micro-C M12 5-pin
- Calibration
- 0–2000 Ω
- Gateway Type
- Resistive to NMEA 2000
- Sensor Input
- Resistive
- Output Signal
- NMEA 2000
- Nominal Voltage
- 12 V
Shipping & returns
- Stocked items typically ship the next business day from our US warehouse.
- 30-day returns on unused stocked items. Exclusions apply. See policy
- Custom and quoted items are non-returnable once production begins.
Warranty
Backed by the original manufacturer’s warranty plus our workmanship guarantee on assembled harnesses. Contact us with your invoice and we’ll coordinate any covered repair or replacement.
Read the full warranty termsTechnical support
Need help choosing the right part?
Our marine electrical team can review your setup and recommend compatible products. Send a photo, a sketch, or your circuit list and we'll come back with a parts list that fits the boat.
Certifications & training
- ABYC-aware build practices
- OEM-grade marine wire & terminals
Additional capabilities are based on hands-on experience building marine wiring systems rather than third-party certification.
Share your project
Have you used this product in a project? Send us photos of your install for consideration in our project gallery.
Why buy from Common Ground Marine
- 20+ years building marine wiring harnesses, panels, and shore-power systems.
- Engineers — not a phone tree — review every custom build before parts are cut.
- OEM-grade components: tinned copper, sealed connectors, marine-rated jackets.