Simrad GO9 XSE with Active Imaging 3-in-1 and C-MAP DISCOVER chart
Touchscreen navigation, fishfinding and optional radar integration
SKU SIM-000-14840-002
GO9 XSE multifunction display package with Active Imaging 3-in-1 transducer and C-MAP DISCOVER chart.
- Screen size
- 9"
- Display resolution
- 800 x 480 px
- Built-in sonar
- Yes
- Chart package
- C-MAP DISCOVER
- Transducer
- Active Imaging 3-in-1
- Supply voltage
- 10–17 V DC
- GPS
- Internal, 10 Hz
- Chart
- C-MAP DISCOVER
Contact us to confirm availability and shipping time. 30-day returns on unused stocked items. Exclusions apply. Return policy · Shipping policy
Shopping as a guest. Sign in to save your cart and check out as a dealer.
About this product
9-inch touchscreen chartplotter and fishfinder with built-in GPS and sonar, with an Active Imaging 3-in-1 transducer.
- 9-inch multi-touch display (800 x 480 px)
- Built-in 10 Hz GPS receiver and echosounder
- C-MAP DISCOVER chart card included
- Active Imaging 3-in-1 transducer included
- C-MAP and Navionics chart compatibility
- Simrad radar and autopilot integration with compatible optional equipment
- Wi-Fi, Bluetooth and NMEA 2000 connectivity
- IPX6 and IPX7 water protection; 10–17 V DC supply
Display and navigation
- Display size
- 9"
- Display resolution
- 800 x 480 px
- Interface
- Multi-touch touchscreen
- Blackbox
- No — integrated display
- GPS
- Internal, 10 Hz
Sonar, charts and networking
- Built-in sonar
- Yes
- Sonar compatibility
- Integrated CHIRP, DownScan and ForwardScan; compatible Active Imaging transducers; one 9-pin xSonic port
- Chart package
- C-MAP DISCOVER chart card included
- Supported chart types
- C-MAP and Navionics
- Transducer included
- Active Imaging 3-in-1
- Connectivity
- Wi-Fi, Bluetooth, NMEA 2000 and Ethernet
Electrical and environmental
- Supply voltage
- 10–17 V DC
- Water protection
- IPX6 and IPX7
- Maximum power consumption
- 20 W
- Typical power consumption
- 12 W
Product details
- Screen size
- 9"
- Transducer
- Active Imaging 3-in-1
- Chart
- C-MAP DISCOVER
- Display
- 9-inch multi-touch
- Waterproof Rating
- IPX6 and IPX7
- Built In Chart Type
- C-MAP DISCOVER
Compatibility & fitment
Works with
- C-MAP and NavionicsUse chart cards compatible with the display and your cruising region.
- Compatible Simrad radar and autopilot systemsRadar, autopilot computer, drive and network components are separate equipment, not included in these display packages.
What’s included
- 1×Simrad GO9 XSE display
- 1×C-MAP DISCOVER chart card
- 1×Active Imaging 3-in-1 transducer
Shipping & returns
- Contact us to confirm availability and shipping time.
- 30-day returns on unused stocked items. Exclusions apply. See policy
- Custom and quoted items are non-returnable once production begins.
Warranty
Backed by the original manufacturer’s warranty plus our workmanship guarantee on assembled harnesses. Contact us with your invoice and we’ll coordinate any covered repair or replacement.
Read the full warranty termsInstallation guidance
These notes are a starting point. They cover the common considerations for a marine install — they don't replace a project review against your specific boat, helm, and circuit list.
- Disconnect the battery and verify zero voltage at the working point before cutting or splicing.
- Match wire gauge to the breaker and the run length, not just to the load.
- Use marine-rated, tinned terminals and seal every crimp against moisture and vibration.
- Route conductors clear of heat sources and protect them where they pass through bulkheads.
Technical support
Need help choosing the right part?
Our marine electrical team can review your setup and recommend compatible products. Send a photo, a sketch, or your circuit list and we'll come back with a parts list that fits the boat.
Certifications & training
- ABYC-aware build practices
- OEM-grade marine wire & terminals
Additional capabilities are based on hands-on experience building marine wiring systems rather than third-party certification.
Share your project
Have you used this product in a project? Send us photos of your install for consideration in our project gallery.
Why buy from Common Ground Marine
- 20+ years building marine wiring harnesses, panels, and shore-power systems.
- Engineers — not a phone tree — review every custom build before parts are cut.
- OEM-grade components: tinned copper, sealed connectors, marine-rated jackets.