
Blue Sea Systems 12V DC USB 2.0 Extension with Cable
USB 2.0 extension port for remote stereo/device control at the dash
SKU BLUE-1044
USB 2.0 data extension port, 5ft prewired cable, mounts in a 1-1/8in hole. Lets you control a stereo from the dash without climbing below. IP45 rated.
- USB Version
- 2.0
- Tether Length
- 5ft (1.52m)
- Mounting Hole
- 1-1/8in dia.
- IP Rating
- IP45 (cover closed)
- Weight
- 0.35 lb
- Voltage
- 12V DC
- Ip Rating
- IP45
- Manufacturer
- Blue Sea Systems
Contact us to confirm availability and shipping time. 30-day returns on unused stocked items. Exclusions apply. Return policy · Shipping policy
Shopping as a guest. Sign in to save your cart and check out as a dealer.
About this product
Blue Sea Systems 12V DC USB 2.0 Extension, 5ft prewired cable, 1-1/8in mounting hole, IP45. Manufacturer PN 1044.
The Blue Sea Systems 12V DC USB Extension solves a common wiring headache: a stereo or head unit mounted in a cabin or below-deck location, with its USB port out of reach for anyone standing at the helm. This extension brings a genuine USB 2.0 data connection up to the dash on a 5-foot prewired cable.
Key features
- USB 2.0 data/voltage port, 5ft (1.52m) prewired cable
- Plugs directly into the stereo's USB port — no adapter needed
- Mounts in a common 1-1/8" hole
- Protective dust cap with tether keeps out dust and spray
- IP45 rated with the cover closed
- Simple, purpose-built solution rather than a generic USB extension cable
Once installed, anyone at the dash can plug a phone or tablet into this extension to control the cabin stereo directly, or to charge and play music from a USB drive without climbing below to reach the head unit itself.
This is a genuine data-carrying USB extension, not just a power port — it's built specifically to relay the stereo's USB signal, so confirm your head unit has a rear or panel-mount USB input designed to accept this kind of remote extension before installing. Route the 5ft cable along an accessible path so it isn't strained or pinched when panels are removed for other maintenance. A short excess length is normal — coil it neatly behind the panel rather than trimming the cable, since a shortened cable can't be easily extended again later if the mounting location changes down the road.
Product details
- USB Version
- 2.0
- Tether Length
- 5ft (1.52m)
- Mounting Hole
- 1-1/8in dia.
- IP Rating
- IP45 (cover closed)
- Weight
- 0.35 lb
- Voltage
- 12V DC
- Manufacturer
- Blue Sea Systems
- Mounting Style
- 1-1/8in hole
Shipping & returns
- Contact us to confirm availability and shipping time.
- 30-day returns on unused stocked items. Exclusions apply. See policy
- Custom and quoted items are non-returnable once production begins.
Warranty
Backed by the original manufacturer’s warranty plus our workmanship guarantee on assembled harnesses. Contact us with your invoice and we’ll coordinate any covered repair or replacement.
Read the full warranty termsTechnical support
Need help choosing the right part?
Our marine electrical team can review your setup and recommend compatible products. Send a photo, a sketch, or your circuit list and we'll come back with a parts list that fits the boat.
Certifications & training
- ABYC-aware build practices
- OEM-grade marine wire & terminals
Additional capabilities are based on hands-on experience building marine wiring systems rather than third-party certification.
Share your project
Have you used this product in a project? Send us photos of your install for consideration in our project gallery.
Why buy from Common Ground Marine
- 20+ years building marine wiring harnesses, panels, and shore-power systems.
- Engineers — not a phone tree — review every custom build before parts are cut.
- OEM-grade components: tinned copper, sealed connectors, marine-rated jackets.
