Weather
    Veratron NMEA 2000 Wind Sensor - Short Arm
    Veratron

    Veratron NMEA 2000 Wind Sensor - Short Arm

    SKU VER-A2C59501984

    Our Price$751.10
    Made to order

    NMEA 2000 short-arm wind sensor for apparent wind speed and direction, with 725 mm mast arm and contactless low-friction measurement.

    Functions
    Wind speed + wind direction
    Arm length
    28.5 in (725 mm)
    Measurement angle
    0–360°
    Wind-speed range
    Approx. 1.8–126 km/h
    Output
    NMEA 2000
    Accuracy
    Approx. ±1° direction / ±1 kn speed
    Supply
    12 V from NMEA 2000
    Connector
    Micro-C M12 5-pin

    Made-to-order lead time confirmed with your quote. 30-day returns on unused stocked items. Exclusions apply. Custom and quoted items are non-returnable once production begins. Return policy · Shipping policy

    Shopping as a guest. Sign in to save your cart and check out as a dealer.

    About this product

    Veratron NMEA 2000 Wind Sensor - Short Arm is a masthead wind instrument designed to provide responsive apparent wind angle and speed data for sailing and navigation systems. The shared mechanical sensor uses contactless measurement to reduce friction and wear at the masthead.

    Key features

    • Measures wind speed and direction
    • 725 mm short-arm masthead format
    • Contactless sensing for low mechanical friction
    • Factory-calibrated sensor
    • Direct NMEA 2000 digital output
    • NMEA 2000 certified interface

    Integration and functionality

    The NMEA 2000 version publishes wind data directly onto the vessel backbone. Correct damping/offset and mast alignment should be commissioned in the receiving system.

    Installation

    Mount at the masthead in clean airflow, aligned to the vessel centerline and away from obstructions. Route the cable with strain relief and protect connectors from mechanical load during mast service.

    Electrical and environmental

    The NMEA 2000 version is powered from the network and draws approximately 30 mA.

    Product details

    Functions
    Wind speed + wind direction
    Arm length
    28.5 in (725 mm)
    Measurement angle
    0–360°
    Wind-speed range
    Approx. 1.8–126 km/h
    Output
    NMEA 2000
    Accuracy
    Approx. ±1° direction / ±1 kn speed
    Supply
    12 V from NMEA 2000
    Connector
    Micro-C M12 5-pin
    Series
    Wind Sensor
    Function
    Wind
    Sensor Type
    Wind
    Connectivity
    NMEA 2000
    Output Signal
    NMEA 2000
    Nominal Voltage
    12 V
    Measurement Range
    0–360° / 1.8–126 km/h

    Shipping & returns

    • Made-to-order lead time confirmed with your quote.
    • 30-day returns on unused stocked items. Exclusions apply. See policy
    • Custom and quoted items are non-returnable once production begins.

    Warranty

    Backed by the original manufacturer’s warranty plus our workmanship guarantee on assembled harnesses. Contact us with your invoice and we’ll coordinate any covered repair or replacement.

    Read the full warranty terms

    Technical support

    Need help choosing the right part?

    Our marine electrical team can review your setup and recommend compatible products. Send a photo, a sketch, or your circuit list and we'll come back with a parts list that fits the boat.

    Certifications & training

    • ABYC-aware build practices
    • OEM-grade marine wire & terminals

    Additional capabilities are based on hands-on experience building marine wiring systems rather than third-party certification.

    Share your project

    Have you used this product in a project? Send us photos of your install for consideration in our project gallery.

    Why buy from Common Ground Marine

    • 20+ years building marine wiring harnesses, panels, and shore-power systems.
    • Engineers — not a phone tree — review every custom build before parts are cut.
    • OEM-grade components: tinned copper, sealed connectors, marine-rated jackets.

    Found in